1-800-537-0706 info@preciseforms.com

Aluminum Forms Accessories

Precise offers a wide range of form accessories. For a full list please view our catalog.

Attached Hardware

Attached Hardware reduces labor cost and prevents lost hardware.

Attached Hardware

Many contractors have a preference for attached hardware as it reduces the amount of materials that must be managed, accounted for, delivered to the worksite, and routinely maintained. Attached hardware systems greatly reduce the need for loose hardware, lower accessory costs, reduce setting time, shorten stripping time, and reduce labor costs.

Captive Pin

Captive Pin

The Captive Pin is extremely fast and efficient. Productivity will increase while reducing the amount of lost hardware. Compatible with existing competitive equipment.

Set & Lok

Set & Lok

The Precise Forms Set & Lok offers the best of a fast and positive locking system. The Set & Lok can be used with our Retractable Long Pin or the Captive Pin.

Retractable Short Pin

Retractable Short Pin

The Retractable Short Pin greatly reduces the need for loose hardware which lowers your accessory cost, setting time, stripping time and labor cost.

Retractable Long Pin

Retractable Long Pin

The Retractable Long Pin can be retracted to allow the use of standard pins and wedges if required.

The Captive Pin is extremely fast and efficient. Productivity will increase while reducing the amount of lost hardware. Compatible with existing competitive equipment.

The Precise Forms Set & Lok offers the best of a fast and positive locking system. The Set & Lok can be used with our Retractable Long Pin or the Captive Pin.

The Retractable Short Pin greatly reduces the need for loose hardware which lowers your accessory cost, setting time, stripping time and labor cost.

The Retractable Long Pin can be retracted to allow the use of standard pins and wedges if required.

The Panel Clip and Pin Keeper are offered as lower cost alternatives to attached hardware. View the brochure.

Pins, Wedges, and Fasteners

A wide variety of accessories are available for Precise aluminum forming systems.

Standard Pin

Standard Pin

The wedge slot in a Precise Tapered Pin is milled, not swedged, for uniform quality. It is made of heat treated steel for greater strength. Dimensions

Flat and Curved Wedge

Flat and Curved Wedge

Tapered Wedges lock forms together securely. Curved Wedges offer the ability to be used in stack form operations with less worry of vibrating out when the wedge is used in a horizontal position.

Hooked Wedge

Hooked Wedge

Standard wedges can potentially release pressure during form stripping. This tension build up can potentially cause a wedge to fly out. The J-hook design will deflect the wedge reducing that potential.

Coil Bolt

Coil Bolt

The Coil Bolt is designed with large threads for extra speed and strength. Available in lengths of 2” and 4”. Special lengths are available upon request.

The wedge slot in a Precise Tapered Pin is milled, not swedged, for uniform quality. It is made of heat treated steel for greater strength. Dimensions

Tapered Wedges lock forms together securely. Curved Wedges offer the ability to be used in stack form operations with less worry of vibrating out when the wedge is used in a horizontal position.

Standard wedges can potentially release pressure during form stripping. This tension build up can potentially cause a wedge to fly out. The J-hook design will deflect the wedge reducing that potential.

The Coil Bolt is designed with large threads for extra speed and strength. Available in lengths of 2” and 4”. Special lengths are available upon request.

Walers

Waler brackets are pinned directly to the forms to straighten the wall and minimize bracing.

WARNING: Waler Brackets of any style are not designed for work platforms.

Waler Bracket

Waler Bracket

Waler Brackets are available for standard size lumber or aluminum channel. These steel brackets are pinned directly to the forms to straighten the wall and minimize bracing. They are designed for Smooth Aluminum.

Waler with Pin

Waler with Pin

The Waler Bracket with Pin is designed for quick setting and stripping. No additional loose hardware is required. Please specify if they are for Smooth Aluminum, Textured Brick, Smooth Brick, or V-Tek Brick Forms when ordering.

Adjustable Waler

Adjustable Waler

The Adjustable Waler Bracket makes setting and removing waler lumber quick and easy. Please specify if you are using Smooth Aluminum, Textured Brick, Smooth Brick, or V-Tek Brick Forms when ordering. Available in 2”x3” or 2”x4” sizes.

Vertical Waler

Vertival Waler

Vertical Waler Brackets are used mainly in a stack form situation. Please specify if you are using Smooth Aluminum, Textured Brick, Smooth Brick, or V-Tek Brick Forms when ordering.

Waler Brackets are available for standard size lumber or aluminum channel. These steel brackets are pinned directly to the forms to straighten the wall and minimize bracing. They are designed for Smooth Aluminum.

The Waler Bracket with Pin is designed for quick setting and stripping. No additional loose hardware is required. Please specify if they are for Smooth Aluminum, Textured Brick, Smooth Brick, or V-Tek Brick Forms when ordering.

The Adjustable Waler Bracket makes setting and removing waler lumber quick and easy. Please specify if you are using Smooth Aluminum, Textured Brick, Smooth Brick, or V-Tek Brick Forms when ordering. Available in 2”x3” or 2”x4” sizes.

Vertical Waler Brackets are used mainly in a stack form situation. Please specify if you are using Smooth Aluminum, Textured Brick, Smooth Brick, or V-Tek Brick Forms when ordering.

Scaffolding

Scaffolding provides a safe work environment on tall or stacked walls.

Safety Scaffolding
Safety Scaffolding

1 – Scaffolding for Rails

Scaffolding for Rails

Safety Scaffolding allows double 2×10 planking, toe boards, mid rail, and guard rail. Scaffolding pockets fit metal or wood vertical rail. Available with or without pin.

2 – Vertical Metal Rail

Vertical Metal Rail

The Vertical Rail provides support for toe guard, mid rails and guard rails in Safety Scaffolding.

3 – Wood Rail Bracket

Wood Rail Bracket

The Wood Rail Bracket is used to connect the lumber vertical rail to the mid rails and guard rails in combination with Safety Scaffolding.

Scaffold Bracket

Scaffold Bracket

The Scaffold Bracket pins securely to the form. The bracket has a supporting leg that straddles the side rails for added stability. It is available in a variety of sizes, with or without a pin, and with or without the waler.

Safety Scaffolding allows double 2×10 planking, toe boards, mid rail, and guard rail. Scaffolding pockets fit metal or wood vertical rail. Available with or without pin.

The Vertical Rail provides support for toe guard, mid rails and guard rails in Safety Scaffolding.

The Wood Rail Bracket is used to connect the lumber vertical rail to the mid rails and guard rails in combination with Safety Scaffolding.

The Scaffold Bracket pins securely to the form. The bracket has a supporting leg that straddles the side rails for added stability. It is available in a variety of sizes, with or without a pin, and with or without the waler.

Wall Ties

Wall Ties are available in multiple styles and lengths.

8″ O.C. Hole Pattern

6-12 Hole Pattern

Flat Wall Tie

Flat Wall Tie

Flat Wall Ties hold the forms at the desired distance from each other. When ordering make sure to specify standard (nominal) or full tie dimension.

Breakback Wall Tie

Breakback Wall Tie

The Breakback Tie is designed to break off recessed into the wall which allows the wall to be sealed to prevent rust staining. Special ties for deeper break-off can be made upon request.

Combo Wall Tie

Combo Wall Tie

The multiple hole configuration of the Combo Tie is perfect for when changing wall thickness. They can be customized to any length and come with three or four holes, depending on the contractors design needs.

Pull Tie

Pull Tie

Pull Ties can be removed from the finished wall and reused for many pours. They are perfect for areas where shipping charges are extremely high.

Flat Wall Ties hold the forms at the desired distance from each other. When ordering make sure to specify standard (nominal) or full tie dimension.

The Breakback Tie is designed to break off recessed into the wall which allows the wall to be sealed to prevent rust staining. Special ties for deeper break-off can be made upon request.

The multiple hole configuration of the Combo Tie is perfect for when changing wall thickness. They can be customized to any length and come with three or four holes, depending on the contractors design needs.

Pull Ties can be removed from the finished wall and reused for many pours. They are perfect for areas where shipping charges are extremely high.

Form Release Agent

Blue Diamond Form Release is a chemically active release agent specifically engineered to positively prevent bonding of concrete to aluminum forms. Blue Diamond Form Release contains no diesel, kerosene, waxes or silicones. 60 Gallon Spray Tank and Parts

  • Economical
  • VOC compliant
  • Cuts maintenance cost
  • Sprays easily in cold temperatures
  • Blue color is easier to see and ensures complete coverage
  • Leaves no residue, stain or discoloration
  • Reduces cleaning of forms
  • Reduces bug holes
  • Pleasant smelling
  • Reduces concrete buildup on formwork
  • Economical
  • VOC compliant
  • Cuts maintenance cost
  • Sprays easily in cold temperatures
  • Blue color is easier to see and ensures complete coverage
  • Leaves no residue, stain or discoloration
  • Reduces cleaning of forms
  • Reduces bug holes
  • Pleasant smelling
  • Reduces concrete buildup on formwork

Pour Ready Process

With the Precise Pour Ready Process your equipment comes to the job site ready to pour.

Pour Ready Process Brochure

Untreated Forms

When casting with new aluminum forms that have not been seasoned you will experience a chemical reaction that has two effects. The wall will have a unsightly appearance and also sticking of concrete residue to the form face.

Treated Forms

The Pour Ready Process minimizes unsightly oxidation or “worming” on the concrete surface from the reaction of the initial pour. When used with a quality reactive form release agent the Pour Ready Process minimizes concrete from sticking on aluminum forms during initial pours.

Custom Form Baskets and Truck Beds

Form baskets allow you to use a boom to place forms where they are needed and remove them when the job is complete. This not only saves time and money but prevents the crew from becoming over exhausted allowing them more energy to set or strip forms.

A wide variety of form baskets are available. Choose one of our standard designs or create custom baskets to fit your needs. Baskets can be created to carry full size forms, fillers, and even accessories keeping the job site cleaner and more productive.

Form Basket
Form Basket
Form Basket
Form Basket
Form Basket

Precise Forms can create truck mounted aluminum form racks to carry all of your forms, fillers, and accessories. A wide variety of designs are available or custom concrete form racks can be created to fit your needs.

Truck Rack
Truck Rack
Truck Rack